U.S. PHARMACOPEIA

Search USP29  
Arginine
Click to View Image
C6H14N4O2 174.20

L-Arginine.
L-Arginine [74-79-3].
» Arginine contains not less than 98.5 percent and not more than 101.5 percent of C6H14N4O2, as L-arginine, calculated on the dried basis.
Packaging and storage— Preserve in well-closed containers.
USP Reference standards 11 USP L-Arginine RS. USP L-Lysine Hydrochloride RS.
Specific rotation 781S: between +26.3 and +27.7.
Test solution: 80 mg per mL, in 6 N hydrochloric acid.
Loss on drying 731 Dry it at 105 for 3 hours: it loses not more than 0.5% of its weight.
Residue on ignition 281: not more than 0.3%.
Chloride 221 A 1.0-g portion shows no more chloride than corresponds to 0.70 mL of 0.020 N hydrochloric acid (0.05%).
Sulfate 221 A 1.0-g portion shows no more sulfate than corresponds to 0.30 mL of 0.020 N sulfuric acid (0.03%).
Iron 241: 0.003%.
Chromatographic purity—
Adsorbent: 0.25-mm layer of chromatographic silica gel mixture.
Test solution— Dissolve an accurately weighed quantity of Arginine in 2 N hydrochloric acid to obtain a solution having a concentration of 10 mg per mL. Apply 5 µL.
Standard solution— Dissolve an accurately weighed quantity of USP L-Arginine RS in 0.1 N hydrochloric acid to obtain a solution having a known concentration of about 0.05 mg per mL. Apply 5 µL. [NOTE—This solution has a concentration equivalent to about 0.5% of that of the Test solution.]
System suitability solution— Prepare a solution in 0.1 N hydrochloric acid containing 0.4 mg each of USP L-Arginine RS and USP L-Lysine Hydrochloride RS per mL. Apply 5 µL.
Spray reagent— Dissolve 0.2 g of ninhydrin in 100 mL of a mixture of butyl alcohol and 2 N acetic acid (95:5).
Developing solvent system— Prepare a mixture of isopropyl alcohol and ammonium hydroxide (70:30).
Procedure— Proceed as directed for Thin-Layer Chromatography under Chromatography 621. Dry the plate between 100 and 105 until the ammonia disappears completely. Spray with Spray reagent, and heat between 100 and 105 for about 15 minutes. Examine the plate under white light. The chromatogram obtained from the System suitability solution exhibits two clearly separated spots. Any secondary spot in the chromatogram obtained from the Test solution is not larger or more intense than the principal spot in the chromatogram obtained from the Standard solution: not more than 0.5% of any individual impurity is found; and not more than 2.0% of total impurities is found.
Organic volatile impurities, Method I 467: meets the requirements.
Solvent— Use water.
Residual solvents 467: meets the requirements.
(Official January 1, 2007)
Assay— Transfer about 80 mg of Arginine, accurately weighed, to a 125-mL flask, dissolve in a mixture of 3 mL of formic acid and 50 mL of glacial acetic acid, and titrate with 0.1 N perchloric acid VS, determining the endpoint potentiometrically. Perform a blank determination, and make any necessary correction. Each mL of 0.1 N perchloric acid is equivalent to 8.710 mg of C6H14N4O2.
Auxiliary Information— Staff Liaison : Lawrence Evans, III, Ph.D., Scientist
Expert Committee : (DSN05) Dietary Supplements - Non-Botanicals
USP29–NF24 Page 192
Phone Number : 1-301-816-8389